FUTURA air units, 2-piece., G 3/8", 0,5 to 10 bar, model series.1

CL 38-10 F

Exemplary representation: 2-part maintenance unit - Futura series 1 Schematic symbol
pcs
{{ $t('shop.display.artikel.hinweis_alternative') }}
{{ $t('shop.display.artikel.beschreibung_headline') }}
Version:
Self-relieving filter regulator with attached lubricator

Materials:
Body: PA 66 GF60, spring hood: POM, diaphragms and seals: NBR, container: polycarbonate

Temperature range:
-10 to +50 °C

Input pressure:
1.5 - 16 bar (model series 0: 1.5 - 12 bar)

Condensate draining:
semi-automatic**

Pressure gauge connection:
G 1/4" (model series 0: G 1/8")

Pore width in the filter:
5 µm

Media:
Compressed air, neutral gases

Advantages:
•automatic venting if there is overpressure on the secondary side,
•easy assembly of single components within a model series using coupling kits,
•Handwheel can be arrested in place by pressing it down and must be locked with a lock - please use VHS 20. Model series 0 cannot be closed,
•semi-automatic oil filling by connecting a hose at the bottom to the oil bowl (G 1/8"). Through this hose, upon pressing the oil fill button, the oil is sucked into the container (not for model series 0).


Max. condensate amount:
28 cm³

Switch panel thread:
M 36x1,5

Oil metering at 1000 l/min:
approx. 1 - 2 drops/min

Oil supply:
40 cm³

Lubricator reaction limit (at 6 bar):
90 l/min

Scope of delivery:
Air unit, including 50 mm pressure gauge

Flow:
90 to 1750 l/min, secondary relieving: 70 l/min

ATEX:
Operating material without its own potential source of ignition in accordance with Directive 2014/34/EU

Optional:
Version with metal bowl and inspection tube -M, automatic discharge -AM, automatic discharge closed when not pressurised (0 to 16 bar) -AMNC, Safety version: with upstream lockable ball valve and filler valve -Si
{{ $t('shop.display.artikel.eigenschaften_headline') }}
Version Air unit
Thread G 3/8"
Pressure regulation range [bar] 0,5 - 10
Container design Plastic container with protective cage
Condensate drain Semi-automatic
Pressure gauge display [bar] 0 - 16
Mounting brackets W 1 F
Coupling kit KP 1 F
Coupling kit with wall console KPW 1 F
input pressure [bar] 1,5 - 16
CL38-10F
{{ $t('shop.all.gewicht') }} 750 g / pcs
{{ $t('shop.display.artikel.zollwarennummer') }} 84811005
{{ $t('shop.display.artikel.rohskonform') }} {{ $t('shop.all.ja') }}
{{ $t('shop.all.dokumente') }}
    Catalogue page Atlas 9 (Page 570_n) atlas9_neutral_seiten/570_n.pdf
    Documentation dokuneutral/doku_futura_n.pdf
    Documentation: Decision aid for selection of air units dokuneutral/entscheidungshilfe_wartungsgeraete_n.pdf
    3D CAD file (volume model) protected/cad/3d/70381/cl38-10f#146442.stp
  • {{ $t('shop.display.datenblatt.titel') }} (Print view)

 
{{ $t('shop.all.unverbindliche_richtwerte') }}

Accessories

{{ $t('shop.all.spaetbestellservice') }}
{{ countdownAsString }} {{ $t('shop.modules.navi.fruehbucher-spaetbestellhinweis.noch') }}
{{ $t('shop.modules.navi.fruehbucher-spaetbestellhinweis.noch') }} {{ countdownAsString }}

{{ $t('shop.all.spaetbestellservice.hinweis') }}

{{ $t('shop.all.wochenendversand') }}
{{ $t('shop.modules.navi.fruehbucher-spaetbestellhinweis.noch') }} {{ countdownAsString }}

{{ $t('shop.all.wochenendversand.hinweis') }}

An error has occurred!

An error has occurred, please reload this page and try again.